Silicone Free Gap Filler Pad Thermally Conductive Gap Filler For
PCB Heat Sinking
Company Profile
Ziitek company is a high-tech enterprise which dedicated to the
R&D, manufacture and sales of the thermal interface materials
(TIMs). We have rich experiences in this field which can support
you the latest, most effective and one -step thermal management
solutions. We have many advanced production equipments,full test
equipments and fully automatic coating production lines which can
support the production for high performance thermal silicone pad,
thermal graphite sheet/ film, thermal double-sided tape, thermal
insulation pad, thermal ceramic pad, phase change material, thermal
grease etc. UL94 V-0, SGS and ROHS are compliant.
Z-paster180-20-11F is a high performance and compatible non-silicone material of the
thermal conductive interface materials.The role is to fill the air
gaps between the heating elements and the heat dissipation fins or
the metal base.
It applies to the liner based on silicone suitably. The flexibility
and elasticity make it suited to the coating of the very uneven
surfaces.Heat can transmit to the metal housing or dissipation
plate from the separate elements or even the entire PCB, which in
effect enhances the efficiency and life-time of the heat-generating
electronic components.
Z-Paster100-20-11F
Series Datasheet-(E)-REV01.pdf
Features
>Silicone-free
>ROSH compliance
>Good thermal conductive:2.0 W/mK
>Soft and Compressible for low stress applications
>Available in varies thickness
Application
>Cooling components to the chassis of frame
>Display card
>Mainboard/mother board
>Notebook
>Power supply
>Heat pipe thermal solutions
>Memory Modules
>Mass storage devices
>Automotive electronics
| Typical Properties of Z-Paster180-20-11F Series | |
| Color | Dark Gray | Visual | Dielectric Breakdown Voltage (T= 1mm above) | >5000 VAC | ASTM D149 | |
|
| Construction | Silicone-free The metal oxide fills | ********** | Dielectric Constant | 5.5 MHz | ASTM D150 | |
|
| Thermal Conductivity | 2.0 W/mK | ASTM D5470 | Volume Resistivity | 6.0X1013 Ohm-meter | ASTM D257 | |
|
| Hardness | 65 Shore 00 | ASTM 2240 | Continuous Use Temp | – 20 To 125 ℃ | ********** | |
|
| Specific Gravity | 2.68 g/cc | ASTM D297 | Outgassing (TML) | 0.30% | ASTM E595 | |
|
| Thickness | 2mmT | ASTM D374 | Flame Rating | 94 V-0 | equivalent to |
Standard size
0.010-inch to 0.200-inch (0.25mm to 5.0mm)
Options
Proprietary NS1 option available to eliminate tack from one side to
aid in handling.
FAQ:
Q: Are you trading company or manufacturer ?
A: We are manufacturer in China.
Q: How long is your delivery time?
A: Generally it is 3-7 work days if the goods are in stock. or it
is 7-10 work days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra cost?
A: Yes, we could offer samples free of charge.
Q: How do I request customized samples?
A: To request samples, you can leave us message on website, or just
contact us by send email or call us.
