5W / MK, factory supply thermally conductive silicone rubber 3.0mmT
For mother board
The TIF5120-50-11US is recommended for applications that require a minimum amount of
pressure on components. The viscoelastic nature of the material
also gives excellent low-stress vibration dampening and shock
absorbing characteristics. The TIF5120-50-11US is an electrically isolating material, which allows its use in
applications requiring isolation between heat sinks and
high-voltage, bare-leaded devices.
TIF500-50-11S
Datasheet-REV02.pdf
Features:
> Good thermal conductive: 5.0W/mK
>Thickness:3.0mmT
>Fiberglass reinforced for puncture, shear and tear resistance
>Electrically isolating
>High durability
>Soft and compressible for low stress applications
Applications:
>mainboard/mother board
>notebook
>High speed mass storage drives
>Heat Sinking Housing at LED-lit BLU in LCD
>Micro heat pipe thermal solutions
>Automotive engine control units
Typical Properties of TIF5120-50-11S |
| Color | Grey | Visual | Composite Thickness | hermalImpedance
@10psi
(℃-in²/W) |
Construction &
Compostion | Ceramic filled silicone rubber | *** | 10mils / 0.254 mm | 0.21 |
| 20mils / 0.508 mm | 0.27 |
| Specific Gravity | 3.15 g /cc | ASTM D297 | 30mils / 0.762 mm | 0.39 |
40mils / 1.016 mm | 0.43 |
| Thichness | 3.0mmT | *** | 50mils / 1.270 mm | 0.50 |
60mils / 1.524 mm | 0.58 |
| Hardness | 45 Shore 00 | ASTM 2240 | 70mils / 1.778 mm | 0.65 |
80mils / 2.032 mm | 0.76 |
| Tensile Strength | 55 ps | ASTM D412 | 90mils / 2.286 mm | 0.85 |
100mils / 2.540 mm | 0.94 |
| Continuos Use Temp | -40 to 160℃ | *** | 110mils / 2.794 mm | 1.00 |
120mils / 3.048 mm | 1.07 |
| Dielectric Breakdown Voltage | >5500 VAC | ASTM D149 | 130mils / 3.302mm | 1.16 |
140mils / 3.556 mm | 1.25 |
| Dielectric Constant | 4.0 MHz | ASTM D150 | 150mils / 3.810 mm | 1.31 |
160mils / 4.064 mm | 1.38 |
| Volume Resistivity | 4.0X1012 Ohm-meter | ASTM D257 | 170mils / 4.318 mm | 1.43 |
180mils / 4.572 mm | 1.50 |
| Fire rating | 94 V0 | equivalent UL | 190mils / 4.826 mm | 1.60 |
200mils / 5.080 mm | 1.72 |
| Thermal conductivity | 5.0 W/m-K | ASTM D5470 | Visua l/ ASTM D751 | ASTM D5470 |
Standard Thicknesses:
0.020" (0.51mm) 0.030" (0.76mm)
0.040" (1.02mm) 0.050" (1.27mm) 0.060" (1.52mm)
0.070" (1.78mm) 0.080" (2.03mm) 0.090" (2.29mm)
0.100" (2.54mm) 0.110" (2.79mm) 0.120" (3.05mm)
0.130" (3.30mm) 0.140" (3.56mm) 0.150" (3.81mm)
0.160" (4.06mm) 0.170" (4.32mm) 0.180" (4.57mm)
0.190" (4.83mm) 0.200" (5.08mm)
Consult the factory to alternate thickness.
FACTORY INFORMATION:
Factory Size
5,000-10,000 square meters
Factory Country/Region
Building B8, Industry District Ⅱ, Xicheng, Hengli Township, Dongguan City, Guangdong Province, P.R.China
Annual Output Value
US$1 Million - US$2.5 Million
Company ProfileZiitek company is a manufacturer of thermal conductive gap fillers, low melting point thermal
interface materials, thermal conductive insulators, thermally
conductive tapes, electrically & thermally conductive Interface
pads and thermal grease,Thermal Conductive plastic,Silicone
Rubber,Silicone Foams,Phase Changing Materials products, with well-equipped testing equipment and strong technical force.
