High Temperature Heat Resistant Acrylic Adhesive Double Sided
Thermal Conductive Tape for LED Light Heat dissipation tape
The TIA™800FG Series products are mostly used for bonding heat dissipation fins,
microprocessors and other power consumption semiconductors. This
type of adhesive tape possesses ultimate bonding strength with low
thermal impedance, with which in effect can be able to replace the
method of lubricating grease and mechanical fixing.
TIA800FG
Series Datasheet-(E)-REV01.pdf
Features
> Thermal Conductivity: 0.8W/mK
> High bond strength to a variety of surfaces double sided
pressure sensitive adhesive tape
> High performance, thermally conductive acrylic adhesive
Applications
| Mount heat sink onto BGA graphic processor or drive processor. |
| Mount heat spreader onto power converter PCB or onto motor control
PCB |
| Can be used instead of heat cure adhesive,screw mounting or clip
mounting |
| Heat sink onto BGA graphic processor |
| Heat sink to computer processor |
| Heat sink onto drive processor |
| LED Power Supply |
| LED Controller |
| LED Lights |
| LED Ceilinglamp |
| Monitoring the Power Box |
| AD-DC Power Adapters |
| Rainproof LED Power Supply |
| Waterproof LED Power Supply |
| Piranha wroof and common lED module |
| LED module for Channelletters |
| SMD LED module |
| LED Flesible strip, LED bar |
| Typical Properties of TIA™800FG Series | |
| Product Name | TIATM805 | TIATM806 | TIATM808 | TIATM810 | TIATM812 | TIATM815 | TIATM820 | Test Method |
| Color | White | Visual |
| Adhesive Type | Acrylic Adhesive | ******** |
| Backing Type | The galss filber | ******** |
| Continuous Use Temp | -45℃ to 120℃ | ******** |
| Composite Thickness | 0.005" 0.127mm | 0.006" 0.152mm | 0.008" 0.203mm | 0.010" 0.254mm | 0.012" 0.304mm | 0.015" 0.381mm | 0.020" 0.508mm | ASTM D374 |
| Voltage Breakdown | > 2500 Vac | > 3000 Vac | > 3500 Vac | > 4000 Vac | > 4200 Vac | > 4500 Vac | > 5000 Vac | ASTM D149 |
| Thermal Conductivity | 0.8 W/mK | ASTM D5470 |
| 180° Peel Adhesion | > 1000 g/inch(Steel, Immediate) | PSTC-1 |
| 180° Peel Adhesion | > 1200 g/inch(Steel after 24 hrs) | PSTC-1 |
| Holding Power 25℃/Hours | > 48 Hours | PSTC-7 |
| Holding Power 80℃/Hours | > 48 Hours | PSTC-7 |
Standard Thicknesses:
0.005"(0.127mm) 0.006"(0.152mm) 0.008"(0.203mm) 0.010"(0.254mm)
0.015"(0.381mm) 0.020"(0.508mm)
Consult the factory alternate thickness.
Standard Sizes:
16" x 100"(406mm x 30.48m)
Individual die cut shapes can be supplied.
Reinforcement:
TIA™800 Series rolls type can add with fiberglass reinforced.
FAQ:
Q: Are you trading company or manufacturer ?
A: We are manufacturer in China.
Q: What's the thermal conductivity test method given on the data
sheet ?
A: All the data in the sheet are actual tested.Hot Disk and ASTM
D5470 are utilized to test the thermal conductivity.
Q: How to find a right thermal conductivity for my applications
A: It depends on the watts of power source , ability of heat
dissipation. Please tell us your detailed applications and the
power, so we can recommend most suitable thermal conductive
materials.
